Are you thinking of getting an air conditioner? That’s a great move because it’s a vital home appliance. But to get value for your money, you need to ensure you’re getting the right air conditioning unit and the right installer.
JAK Services can help along these lines. However, to use your appliance judiciously, there are certain dos and don’ts you’ve to take note of. In this post, we’ll outline a few of them.
Leaving Your Windows Open
Cooling your room becomes a harder task for your air conditioner when you allow extra heat into your room by leaving your windows open.
Keeping them open only allows sun rays and dust into your home and nothing more. It doesn’t help the cooling process.
Hence, it’s best if you slide your curtains over the window or close your blinds. This rather helps your conditioner to work efficiently and saves you extra electricity bills.
Not Changing Your Filter
Most people seem to forget that their air condition units have filters, which need to be replaced periodically.
With a dirty air filter, air movement is restricted, and your air conditioner has to put in the extra effort.
Also, impeded airflow can cause your air conditioner to freeze over. In such cases, you’ll have to turn it off and wait for it to defrost.
However, you can save yourself the stress of waiting for a defrost by changing your filter regularly, preferably every 1-3 months.
Setting to a Lower Temperature
After walking through the sun, you probably can’t wait to get home and turn on your air conditioner (AC). In these moments, you may assume that setting your unit to a lower temperature would cause it to cool faster.
Well, like most people, you are wrong. Your air conditioner cools your home at the same rate, whether you turn it down 20 degrees lower or one degree lower.
However, there are consequences when you set your unit too low. The extended hours can cause wear and tear and also cause your system to freeze over.
So why don’t you get yourself a programmable thermostat that connects to your mobile phone? So you can turn your unit on some minutes before you get home. Wouldn’t you love to enter a cool home after a hard day’s work?
Having a Poor Drainage System
Have you wondered why the walls around your air conditioner are covered in mold? Chances are, the moisture from your unit is not draining properly.
Your air conditioning set produces a lot of moisture, and this moisture, if not drained well, can affect anything nearby, be it your walls, roof, or floors.
During installation, find out from your installer where your drainage system will be and how effective it is. But if you’ve had your unit for a while, you can get a professional to install a drainage system for you.
Furthermore, it’s also essential you carry out routine check-ups to identify damages caused due to a poor drainage system.
Having a Bad Outdoor Unit Location
When you get the outdoor unit of your air conditioning set, the ideal thing is not to hide it amidst trees. Neither is it to expose it to extreme sun rays.
Hiding your unit amidst plants could block airflow while exposing it to extreme sunlight could affect its operations.
Where should you position your unit? Truth is, there is no perfect spot for your outdoor unit.
Nonetheless, it is essential to consider certain factors such as the noise it produces, extreme sunlight, or even strong wind when positioning your unit.
Overlooking these common mistakes can cost you dearly. You may need to spend money on repairs, or pay higher electricity bills or worse have your health compromised. We recommend that you take note of the points above and avoid these mistakes.